REPLACE WITh BATTERy CR2032
fig.39
How to Use Your Operator
In-built Locking facility
Do NoT
lock your door with the locking bars when your
operator is engaged. This operator has an in-built locking
facility. With the operator engaged your door will be locked
whether the power is on or off.
Manual Door operation
CAuTIoN:
When operating the manual
release while the door is open. It may fall
rapidly due to weak or broken springs, or
an improperly balanced door.
CAuTIoN!
Do not disengage the operator to
manual operation with children/persons or
any objects including motor vehicles within
the doorway.
To disengage the operator from the door, (preferably with
the door in the closed position) pull down on the string
handle on an angle towards the door. This will allow you to
manually open or close the door. To re-engage the operator
pull the string handle away from the door.
WARNING!
When the operator is manually
disengaged, the door is no longer locked. To
lock the door manually, re-engage the operator
after the door is closed.
Power failure
When there is a power failure, the operator will be unable to
automatically open or close your garage door. To use your
door whilst there is no power you will need to disengage the
opener and use the door manually – see Manual Operation
above.
Removing the battery from transmitter
(
Battery Type:
3V Lithium Battery
CR2032
). Use a
nonmetallic object (e.g. plastic Pen) to remove the battery
(
fig.39
).
Diamond PD
Power Drive
: Instruction Manual
© Copyright 2011
27
PA1000
Instruction Manual (Instructions d’installation)
