Automatic Technology Australia Pty Ltd to the extent that such may be lawfully excluded hereby expressly disclaims all
conditions or warranties, statutory or otherwise which may be implied by laws as conditions or warranties of purchase of an
Automatic Technology Australia Pty Ltd Sliding Gate Opener and Automatic Technology Australia Pty Ltd hereby
further expressly excludes all or any liability for any injury, damage, cost, expense or claim whatsoever suffered by any
person as a result whether directly or indirectly from failure to install the Automatic Technology Australia Sliding Gate
Opener in accordance with these installation instructions.
CONTENTS
PAGE CONTENTS
3
FEATURES
4
CONTROL BOARD LAYOUT
5
MENU STRUCTURE
6
INITIAL ELECTRICAL INSTALLATION
7
POWERING UP THE CONTROLLER
7
SETUP TRAVEL
7
LIMIT SWITCH / AMP TRAVEL SETUP
9
RE-PROFILING TRAVEL
10
SETTING TIMED TRAVEL
11
SETTING PEDESTRIAN POSITION
12
DESCRIPTION OF STANDARD OPERATION
13
CONTROL BOARD ADJUSTMENTS
13
MENU 2 CURRENT TRIPS
14
MENU 3 AUTO-CLOSE TIMES
14
MENU 4 LOCK TIMES
15
MENU 5 LIGHT TIMES
15
MENU 6 MOTOR SETTINGS
15
MENU 7 OPERATING MODES
17
PARAMETER VIEWING AND EDITING
18
TRANSMITTER OVERVIEW
18
BASIC CODE TRANSMITTER PROCEDURE
19
TRANSMITTER EDIT PROCEDURE
20
TRANSMITTER LIST MANAGEMENT
21
CODE OPERATION (LOCATION EMPTY)
21
CODE OPERATION (LOCATION USED)
21
DELETE OPERATION
21
EDIT OPERATION
21
COPY OPERATION
22
REMOTE CODE SET PROCEDURE
23
DIAGNOSTIC TOOLS (MENU 8)
23
MENU 8.1 TEST INPUTS
23
MENU 8.2 TEST TX’ERS
23
MENU 8.3 DISPLAY HISTORY
23
MENU 8.4 MEMORY USAGE
24
MENU 8.5 SERVICE COUNTER
24
MENU 8.6 COUNTERS
24
MEMORY TOOLS (MENU 9)
24
MENU 9.1 CLR CONTROL
24
MENU 9.2 CLR TX’ERS
25
SPECIFICATIONS
26
WARRANTY AND EXCLUSION OF LIABILITY
