TRANSMITTERS LIST MANAGEMENT
STEP 1 ACCESSING THE LIST
METHOD 1.
GO TO START OF LIST
The list be be accessed by selecting the
“Code Transmitter”
MENU (as in STEP 1 of the BASIC CODE TRANSMITTER
PROCEDURE), followed by pressing NEXT. This will display
the list with transmitter number 1 shown.
METHOD 2.
GO TO A TRASMITTER’S LOCATION
WITHIN LIST
A particular transmitter’s location within the list can be displayed
by selecting the
“Code Transmitter”
MENU (as in STEP 1 of
the BASIC CODE TRANSMITTER PROCEDURE), followed
by pressing anyone of the transmitter’s buttons.
When the “Press Tx’er Again” message is displayed press NEXT
to display the transmitter’s location within the list. NOTE
“VIEW>” will not be shown if the transmitter is not stored.
20
THE CONTROLLER PROVIDES A TRANSMITTER LISTING FACILITY WHICH ENABLES THE USER TO FIND A
TRANSMITTER LOCATION WITHIN ITS MEMORY. ONCE LOCATED, A STORED TRANSMITTER CAN BE
REPLACED, DELETED, EDITED, COPIED OR, IF THE LOCATION IS EMPTY, A TRANSMITTER CODED INTO IT.
MENU
1
Code
Transmitter
PRESS
Access The Code Transmitter MENU
Press
Tx’er
Button!
LIST>
Displaying The List starting at Transmitter #1
Press
Tx’er
Again!
VIEW>
Display Transmitter’s Location In List
PRESS
Press
Tx’er
Button!
LIST>
Press Transmitter Button
PRESS
MENU
1
Code
Transmitter
PRESS
Access The Code Transmitter MENU
PRESS
I
ID
D
[NO
NAME]
OFF
OFF
OFF
OFF
List with Transmitter #1 shown
List with Transmitter’s location shown
Location
Not used!
12
4
I
ID
D
B
B
SMITH
OSC
PED
LGT
VAC
1
4
