TRANSMITTER EDIT PROCEDURE
19
STEP 1. DISPLAY TRANSMITTER RECORD
Using one of the methods below, display the required transmitters
details.
1.
Follow the BASIC CODE TRANSMITTER
PROCEDURE to STEP 3 for a new or existing transmitter.
2.
Select EDIT when LISTING TRANSMITTERS
STEP 2. SELECTING THE FIELD TO EDIT
Select the desired field by using NEXT or PREV to move the
cursor to the left or right and between the top and bottom lines.
STEP 3. EDITING THE BUTTON FUNCTION FIELDS
Preform this step if one of the button function fields is selected.
Use UP and DOWN to change the displayed value. The available
functions are shown below. Selecting OFF will prevent the
controller responding to the button at all. When the correct setting
has been made repeat STEP 2 to select the next field to edit or
continue with STEP 7. The example below shows editing the
function assigned to the transmitter button 2. The transmitter in
the example is transmitter number 123 which has a label of AB
Smith.
AVAILABLE FUNCTIONS
VAC
(Vacation Mode)
LGT
(Courtesy Light)
STP
(Stop)
OPN
(Open)
CLS
(Close)
SWP
(Swipe)
PED
(Pedestrian access)
OSC
(Open/Stop/Close)
OFF
(No action)
STEP 4. EDITING THE STORE LOCATION
This feature is only available when editing is initiated by coding
the first button of a new transmitter. When the cursor is moved to
the store number field, the UP and DOWN buttons step through
the available store locations. This is useful when managing
transmitters using a scheme which ties the store location to the
transmitter’s owner.
STEP 5. SELECTION OF ID OR SN DISPLAY
When the cursor is moved to the ID/SN indicator, the UP and
DOWN buttons toggle between displaying the ID label and the
transmitters serial number The serial number display is provided
for an additional means of transmitter management. The
transmitter in the example has a serial number of 123456789.
STEP5. EDITING A CHARACTER FIELD
Preform this step if one of the character fields of the transmitter
name is selected. Press UP or DOWN to change the selected
character. When a change is made the bottom line of the display
will show a list of available characters to choose from with the
current value indicated at the cursor position. When the correct
character has been selected repeat STEP 2 to select the next field
to edit or continue with STEP 7.
STEP 7. SAVING THE CHANGES
Press SET to save the settings or EXIT to abort without saving.
NOTE
If all button functions are set to OFF then when SET is
pressed, the controller will prompt to confirm the transmitter.is to
be deleted. Press SET to delete or EXIT to continue editing.
PRESS
THE PROCEDURE BELOW IS USED TO EDIT THE DISPLAYED TRANSMITTER’S SETTINGS.
123
I
ID
D
A
B
SMITH
OSC
PED
LGT
VAC
PRESS
Selecting Button Function
D
PRESS
124
I
ID
D
A
B
SMITH
OSC
PED
LGT
VAC
Character For Name Selected
A
124
I
ID
D
B
B
SMITH
56789
AB
CDEFGHIJ
PRESS
Character For Name Edited
B
124
I
ID
D
B
B
SMITH
OSC
PED
LGT
VAC
Saving Changes
PRESS
124
I
ID
D
123456789
OSC
PED
LGT
VAC
Displaying Serial Number
S
SN
N
B
PRESS
123
I
ID
D
A
B
SMITH
OSC
PED
LGT
VAC
4
PRESS
Selecting a Shore Location Number
