18
Axess® Pro Series 3000
Owner Installation Instructions
Coding Transmitter
Axess® pro series 3000 shutter door opener can store
up to fi ve hundred and eleven (511) transmitters in its
memory. Each transmitter can be allocated an alpha-
numeric ID label up to eleven (11) characters in length
and each button can be assigned to one of several
control functions. The settings for a transmitter are
represented in
Fig. 18
. It shows the transmitter’s store
number, ID label or serial number and the functions
assigned to each of its four buttons. To toggle between
ID/SN display, press UP/DOWN with the cursor on the
ID/SN indicator. The procedures below code, delete,
replace, edit and copy transmitter records.
Step 8 - Coding Transmitter Button
Navigating To Menu 1 “Code Transmitter”
1. Press NEXT to navigate to Menu 1
(Fig. 19)
.
2. Press SET to enter the code set procedure.
Storing Transmitter Code
1. The controller will prompt to press one of the
transmitter’s buttons.
2. Press the transmitter button you wish to use to
operate the Door Opener (e.g. button 1)
(Fig. 20)
.
3. Press the same transmitter button again as
prompted by the display
(Fig. 21)
.
Selecting Function Of The Button
The controller will now show the transmitter’s record,
with a cursor on the fi eld for the button being coded
(Fig. 22)
. Use OPEN/CLOSE to select the function for
the button.
Available functions:
OSC (Open/Stop/Close)
PED (Pedestrian access)
SWP (Swipe)
CLS (Close)
OPN (Open)
STP (Stop)
LGT (Courtesy Light)
VAC (Vacation Mode)
AUX (Auxiliary )
OFF (No action)
NOTE:
OSC will change to OS in the case where PE
Beams are not installed.
Press SET to save the settings or STOP to abort
without saving
(Fig. 23)
.
Returning To Main Screen
The “Code Transmitter” menu will now be shown.
Press STOP to return to the MAIN SCREEN and test
the transmitter.
NOTE:
To edit the other settings, refer to
TRANSMITTER EDIT PROCEDURE.
)$
.AME3.
/3#0%$,'46!#
20
fi g
MENU 1
Code Transmitter
PR E S S
21
fi g
22
fi g
23
fi g
# 1 [No Name]
OSC OFF OFF OFF
C
PRESS
# 1 [No Name]
OSC OFF OFF OFF
C
PRESS
PRESS
Press Tx’er
Again! View
PR E S S
19
fi g
Press Tx’er
Button! List
PR E S S
18
fi g
I.D label/Serial number
Button 4 function
Button 3 function
Button 2 function
Button 1 function
Store number
ID/SN display indicator
