24
Axess® Pro Series 3000
Owner Installation Instructions
Pedestrian Access Position
After completing the limit setup procedure the
Pedestrian Access position is automatically set to
a position which is approximately in the middle of
the door travel. The position can be manually set
by following the SETTING PEDESTRIAN POSITION
procedure.
Step 10.1 - Setting Pedestrian Position
Drive and stop the door at the desired Pedestrian
Access position by using a transmitter or wall
control unit.
Press PREV to navigate to Menu 10.
Press SET. MENU 10.1 will be displayed.
Press NEXT to go to MENU 10.3
Press SET on the wall control unit to save the
Pedestrian Access position
(Fig. 43)
.
Press the STOP button to exit to the main screen.
Step 10.2 - Checking Pedestrian Position
When activated by a transmitter button which is coded
as Ped mode, the opener drives the door to the preset
position from either above or below. Ped Mode’s active
status is indicated on the display
(Fig. 44)
. If a Ped
Mode button is pressed while the door is moving, the
door will stop. If a Ped Mode button is pressed when
the door is in the Ped position, then the door will close.
Errors During Setting Of Travel Limits And
Pedestrian Position
During the above procedure many error checks are
preformed. If an error is detected, a message will be
displayed indicating the error.
1.
2.
3.
4.
5.
6.
Setting Pedestrian Position
MENU 10.3
Set Pedestrian
PR E S S
43
fi g
Ped’n Access
FRI 11:06:44 STD
44
fi g
To Recalculate travel times
Reprofi ling is a simplifi ed way of re-learning the travel characteristic of a previously setup Limit Switch travel
installation. Re-profi ling can be used when the travel characteristics of the door change due to mechanical
adjustments etc. To initiate a re-profi le, simply locate “MENU 10.2 Reprofi le Travel”, press SET and follow the
prompts. The door will start to move and re-calculate force margins. The door can move between the open and
close limit positions up to two (2) times (depending on the position of the door and the power up condition). A
single beep will be heard once the process is complete.
Reprofi le The Door Travel
