Owner Installation Instructions
Axess® Pro Series 3000
19
Editing Transmitter Settings
Display Transmitter Record
Using one of the methods below, display the required
transmitters details.
Navigating To “Edit Transmitter” Menu
1. Press NEXT to navigate to Menu 1
(Fig. 24)
.
2. Press SET to enter the transmitter edit procedure.
3. Press NEXT to enter transmitter list and edit mode.
Editing Button Function Field
1. Press NEXT or PREV to move the cursor to the left or
right and between the top and bottom lines to select
the desired fi eld.
2. Press OPEN or CLOSE to change the displayed value
(Fig. 25)
. The available functions are shown below.
Selecting OFF will prevent the opener responding to
that button.
Available
functions
OSC (Open/Stop/Close)
PED (Pedestrian access)
SWP (Swipe)
CLS (Close)
OPN (Open)
STP (Stop)
LGT (Courtesy Light)
VAC (Vacation Mode)
AUX (Auxiliary )
OFF (No action)
NOTE:
OSC will change to OS in the case where PE
Beams are not installed.
3. Press SET to save changes or press NEXT or PREV
to move to the next fi eld. The example in
(Fig. 26)
shows that PED is assigned to the transmitter button
2. The transmitter in the example is transmitter
number 14 which has the ID label AB Smith.
NOTE:
If all button functions are set to OFF, when
SET is pressed, the opener will prompt to confi rm if
the transmitter is to be deleted. Press SET to delete or
STOP to continue editing.
14 I
D
A B SMITH
OSC PED LGT VAC
PRESS
D
PRESS
14 I
D
A B SMITH
OSC PED LGT VAC
PRESS
4
MENU 1
Code Transmitter
PR E S S
26
fi g
25
fi g
24
fi g
