Owner Installation Instructions
Axess® Pro Series 3000
11
Before Drive Unit Installation
The Axess® Pro Series 3100 Roller Shutter Door
Opener is designed to operate most commercial heavy
duty roller shutter doors. The door must be in good
working condition and travel freely in the guides.
Step 1 - Initial Check
Before commencing installation check the following:
The door moves freely for the full travel in both
directions.
The mounting must be solid construction
(concrete, brick or steel). It must be able to
withstand the full force applied to the door.
There is a 240V 10 Amp power point located
within one metre of the drive unit.
EasyBeam™ must be installed. They should be
located as close to the door as practicable.
Selecting the installation location
When selecting the installation location consider the
following:
Minimum distance between the door drum and
mounting plate needs to be 15mm and not more
than 100mm.
Minimum distance between the drive unit and the
imposing structure 10mm.
The overhead clearance needs to be at least
150mm.
Step 2 - Drive Unit Pre-assembly
The opener can be installed on either the right- or left hand
side of the door (when viewed from inside the building). The
timing assembly, mounting fl ange and drive shaft needs to
be assembled according to the installation side. Assembling
the opener for RIGHT- HAND installation is explained below.
for LEFT-HAND side just assemble the parts from the other
end.
Determine on which side of the door the opener is
to be mounted.
Insert the output drive shaft into the gearbox and
fi x it with lock washer and lock nut
(Fig. 04)
. After
tighten the lock nut lock it by bending one tooth
of the lock washer into the slot on the lock nut
(Fig. 05)
.
Line up the shaft of the timing assembly with the
keyway onto back of the drive shaft. Push and
secure the timing assembly with screws ensuring
the groumet is toward the motor
(Fig. 06)
.
Assemble the mounting fl ange with four M8x20
screws to the opener
(Fig. 07)
NOTE:
the drive unit is not designed to mount upside
down.
1.
2.
3.
4.
•
•
•
1.
2.
3.
4.
$
04
fi g
05
fi g
07
fi g
06
fi g
