SEQUENCE OF I NSTALLATION
SIDE ROOM REQUIREMENTS
Figure 1 shows the minimum side room that is required.
The distance between the edge of the door curtain and the in-
side of the bracket is 85mm, and the distance between the
edge of the door curtain and the outside of bracket is 135mm.
Figure 2 shows the recommended side room. The distance
between the edge of the door curtain and the inside of the
bracket should be 110mm minimum, and the distance between
the edge of the door curtain and the outside of bracket is
160mm minimum.
1. CHECK OPERATION OF DOOR
BEFORE BEGINNING THE INSTALLATION OF THE
EASY ROLLER AUTOMATIC OPENER CHECK THE
OPERATION OF THE DOOR.
The door must be well balanced and be in an reasonable oper-
ating condition. You should be able to lift the door smoothly
and with little resistance. It should stay open around 900mm to
1200mm above the floor. The door should not stick or bind in
the guide tracks. The ideal operational effort in raising or low-
ering the door should not exceed a force of 10 kg (22 lbs.).
2. FIXING OF DOOR WEIGHT BARS
Move the door manually to the mid open position. Place the
weight bars equally apart on the bottom rail of the door and
secure them with the fasteners provided (Fig. 2A). Check the
operation of the door again. If the door feels heavy it may re-
quire extra tension to be added to the door springs. Refer to
the door Installation manual from manufacturer on how to ten-
sion the door.
7
RECOMMENDED SIDE ROOM
160mm
110mm
MINIMUM SIDE ROOM
135mm
85mm
FIG
.
1
FIG. 2
FIG. 2A
