AutoGate VPG-24 (LM), Installation & Operation Manual

Page: 9 / 42

1.800.944.4283 AutoGate Technical Support
JULY 2016
9
ORIENTATION
The AutoGate Vertical Pivot Gate (VPG) in this manual you will see it referred to as “system” .The VPG has
many features that make it effective, reliable, and easy to use, and some of these important features are
summarized in the table below. Note that not all systems are identical as width, gate panel implementation,
finish, accessories such as lights, and other accessory component options vary order to order. Below are
some key features to the System.
GLOSSARY & TERMS
Figure 1.1 through 1.3 will orient you to the basic components of the system. Most of the terms are self
explanatory; however, the following will help you understand certain components and terms.
Operator
-
A mechanical device used to open and close (raise and lower) a gate panel/drop arm system.
False Panel
-
Parallel to operator enclosure is the False Panel . It is permanently attached to the operator
and is comprised of two (2”) inch steel tubing and sheet metal. Its purpose is to protect pedestrian,
technician, and system users from being in the area of the pivoting gate panel/drop arm.
Hand (or handing)
-
The system comes in left hand or right hand configurations. This refers to the location
of the operator when viewed from the secured side of the closed Gate. To illustrate “handing” see the figure
1.1 for an example of a Right Handed (RH) system.
Feature Explanation
All Electric Operation.
NO HYDRAULICS!
24 volt DC with input voltage of 120-volt (standard) or 240-volt single phase.
Built-in battery backup for continued operation during power outages. Can be
outfitted with solar charging for remote locations without AC power. No hydraulic
fluids (for environmentally sensitive areas). Batteries are not included, but are
required.
Gate Panel Options Ranging from highly decorative pickets to a simple chain link or industrial anti-climb
panels for military or correctional facilities.
Opens Completely The VPG opens fully to 90°. Easily accommodates tall vehicles and equipment.
Duty Cycle: Continuous The operator is engineered and rated for continuous duty and is specifically
designed for constant use throughout the day.
Low Maintenance Requires only periodic lubrication and annual tension adjustment. Very low order
of service required compared to our competition.