AutoGate VPG-24 (LM), Installation & Operation Manual

Page: 10 / 42

1.800.944.4283 AutoGate Technical Support
JULY 2016
10
Operator Orientation
All of the operators mechanical and electrical components are housed inside the operator (See Figure 1.2
through Figure 1.4). The operator is a lockable steel cabinet that mounts on a raised concrete pad. A
separate NEMA 4x electrical enclosure is also housed inside the operator. The electrical enclosure contains
the master control circuit board and the terminal blocks/wire management system. It may also house a variety
of optional electrical components and configuration custom to your specific order.
Figure 1.1 Operator (not depicting Drop Arm or optional gate panel)
Figure 1.2 Components Housed in the Operator (Picture may not depict exact items)
Operator Gate Arm
Operator Gate Arm
False Panel
Cabinet Doors
Throat—the area between the operator and the false panel.
AMP Meter &
Cycle Counter
NEMA 4x
Electrical
Enclosure
Battery Shelf
GFCI Service
Outlet
(120 VAC, 15A
Footpads
Extension Springs
Transportation/Maintenance (T/M) safety
pin (shown in Drop Arm closed position)
Drive Pullies
(“Bullwheels” )
Electrical enclo-
sure is hiding the
2nd Bullwheel
Slide Assembly
Pivot Shaft
Linkage Arm
Drive Motor