AutoGate VPG-24 (LM), Installation & Operation Manual

Page: 4 / 42

1.800.944.4283 AutoGate Technical Support
JULY 2016
4
END USER / INSTALLER CHECK OFF LIST
IT IS RECOMMENDED THAT EACH ITEM ON THIS INSTALLATION CHECKOFF LIST
BE DISCUSSED WITH THE END USER.
____ FOUR WARNING SIGNS SECURELY INSTALLED, TWO ON EACH SIDE OF GATE VISABLE IN BOTH OPEN AND
CLOSED POSTION. (REQUIRED)
____ TWO MEANS OF ENTRAPMENT PROTECTION ARE INSTALLED TO REVERSE THE GATE IN THE CLOSING DIRECTION
(i.e. PHOTO BEAM, CONTACT SENSOR OR TYPE A CURRENT SENSING PER UL 325—6TH EDITION (REQUIRED)
____ OTHER ENTRAPMENT RISKS IN THE GATE TRAVEL AREA HAVE BEEN PROTECTED PER ASTM F-2200
(i.e. SCREENING, FENCING, ETC.) ( REQUIRED)
____ CUSTOMER ADVISED THAT GATE IS FOR VEHICULAR TRAFFIC ONLY. (REQUIRED)
____ A SEPARATE PEDESTRIAN ENTRY AND/OR EXIT IS PROVIDED. (REQUIRED)
____ GATE GUARD / FENCED OFF AREA INSTALLED ON BACK SIDE OF OPERATOR. (REQUIRED)
____ KICK PLATE INSTALLED ON DOOR SIDE OF OPERATOR. (REQUIRED)
____ ALL ACCESS CONTROL DEVICES A MINIMUM OF SIX FOOT (6’) AWAY FROM THE MOVING GATE PANEL. (REQUIRED)
____ CLASS OF OPERATOR IS APPROVED FOR THE APPLICATION OF THE OPERATOR (CLASS 1,2,3,4) (REQUIRED)
____ CONTROLS INTENDED TO RESET GATE AFTER BEING OBSTRUCTED ARE INSTALLED IN LINE OF SIGHT (REQUIRED)
____ FIELD WIRING SECURED TO AVOID PINCHING DAMAGE.
____ CUSTOMER INSTRUCTED AND IS CLEAR ON PROPER USE OF GATE OPERATOR. (REQUIRED)
____ CUSTOMER INSTRUCTED ON PROPER USE OF ALL CONTROL DEVICES USED WITH OPERATOR.
____ SAFETY INSTRUCTIONS WERE REVIEWED AND LEFT WITH CUSTOMER. (REQUIRED)
____ DISCUSS THE POTENTIAL FOR A PREVENTATIVE SERVICE AND MAINTENANCE CONTRACT.
____ A PHOTO OF COMPLETED INSTALLATION TAKEN FROM FRONT AND BACK OF GATE & DATED.
____ CUSTOMER TRAINED ON MANUAL OPERATION OF THE GATE.
____ CUSTOMER ADVISED NOT TO DISCONNECT THE UL 325 ENTRAPMENT ALARM IN ANY WAY
____ ALL ENTRAPMENT PROTECTION MEANS HAVE BEEN TESTED AND VERIFIED FOR PROPER OPERATION
THIS GATE OPERATOR IS INSTALLED FOR USE AS A CLASS ______ INSTALLATION.
Operator Class Designation
CLASS I - RESIDENTIAL VEHICULAR GATE OPERATOR – A vehicular gate operator (or system) intended for use in garages or
parking areas associated with a residence of one to four single families.
CLASS II – COMMERCIAL/GENERAL ACCESS VEHICULAR GATE OPERATOR – A vehicular gate operator (or system) intended for
use in a commercial location or building such as a multi-family housing unit (five or more single family units), hotel, garages, retail store
or other buildings accessible by or servicing the general public.
CLASS III – INDUSTRIAL/LIMITED ACCESS VEHICULAR GATE OPERATOR – A vehicular gate operator (or system) intended for use
in an industrial location or building such as a factory or loading dock area or other locations not accessible by or intended to service the
general public.
CLASS IV - RESTRICTED ACCESS VEHICULAR GATE OPERATOR – A vehicular gate operator (or system) intended for use in a
guarded industrial location or building such as an airport security area or other restricted access locations not servicing the general
public, in which unauthorized access is prevented via supervision by security personnel.
IT IS RECOMMENDED THAT END USER & INSTALLER
MUST RETAIN A COPY OF THIS CHECK OFF LIST FOR THEIR RECORDS