equipment det
ails
164
equipment det
ails
165
Blind and flyscreen
The blind and flyscreen operate Independently
of each other and are engaged by connecting
to each other and sliding.
Safety precautions:
1. Repairs should be carried out only by
trained personnel.
2. Inform an approved dealer in case of
defects and malfunctions.
3. Before starting off, check the rooflight
for damage in the acrylic dome (tension
cracks) and the winding mechanism
which could arise owing to, for example,
branches and other natural causes.
4. Do not step in the acrylic dome.
5. Close the roof light before starting off
(check whether it is locked).
6. Do not leave the vehicle with the rooflight
open (danger of burglary or from rain).
7. Do not open in strong wind or rain.
8. Before opening, remove snow, ice, dirt,
etc. from the acrylic dome.
9. Malfunctions are to be repaired by an
approved dealer at once.
10. Do not use caustic detergents (danger of
tension cracks in the acrylic dome).
11. Do not operate whilst the vehicle is moving.
Care instructions:
-
Please clean the acrylic panes with the
Seitz Acrylic Cleaner.
-
Stains and light scratches on the acrylic pane
can be removed by using the Seitz Acrylic
Polish and the Seitz special polishing cloth.
-
Use talcum powder (4 times yearly) to care
for the rubber seals
-
Clean the blinds only with water and mild
soap suds
-
The guarantee becomes null and void if
these instructions are not followed.
THE oMnIVEnT (12V) RoofLIGHT
The Omnivent is a double glazed rooflight
constructed from a synthetic ultra-violet
screened material. Its side operating mechanism
allows a completely free central opening with
built-in fixed ventilation when closed.
Red Switch = Mode of operation
Induction (IN)
IN
Expel (OUT)
OFF
OUT
Black Switch = Speed Control
1, 2 and 3
Omnivents give no fixed ventilation when set
on induction.
WInDoWS
To open, turn knobs anti-clockwise and open
catches. Swivel the window pane open to the
desired position and close knobs clockwise to
lock in the open position.
To close, reverse the operation.
All opening windows have two catch positions.
The first position is for ventilation the second
seals the window from ventilation and rain.
oPERATInG InSTRUCTIonS foR BLInDS
Closing:
Grab the end bar in the middle and
push the blind and flynet together or singly
(blind - lower end bar) downwards until the
required position is reached.
opening:
Push the end bar of the flynet and /
or of the blind upwards.
Care instructions:
Clean the blind only with a
damp sponge. Use only water or with mild suds.
In order to avoid material fatigue, do not leave
the flynet closed for a long time.
Roof LIGHTS
When opening the roof lights, care must be
taken to release the locking mechanism as the
unit is raised.
Roof lights must be fully closed when driving.
Roof lights provide essential fixed levels of
ventilation.
Mini Heki Rooflight
To open depress button and push bar upwards.
The rooflight has two open ventilation
positions and a fully open position.
The blind and flynet operate independently of
each other and are engaged by connecting to
each other and sliding.
Midi Heki Roof-light
With operating bar:
To open, depress
button and push bar to required position. The
rooflight has two open ventilation positions
and a fully open position.
To close, reverse the operation and then check
if locked into position.
With crank:
To open, rotate the crank until a
resistance is noticeable during the operation.
To close, reverse the operation and then check
if locked into position.
windows, blinds and rooflights
