equipment det
ails
132
equipment det
ails
133
• When the appliance is first put into
operation, there may be a mild odour
which will disappear after a few hours.
• Ensure the living area is well ventilated.
• The refrigerator will take several hours
to reach its operating temperature in the
cooling compartment
• The freezer compartment should be
cold about one hour after switching on
the refrigerator.
Controls
A. Manual energy selection MES (eg RM 7XX1 L)
A = energy selection switch
B = gas/electric thermostat AC/DC
C = operating displays (3 LEDs)
A
B
C
B. Automatic and manual energy selection
AES ( eg RM 7XX5 L)
A = energy selection switch
B = gas/electric thermostat AC/DC
C = operating displays (4 LEDs)
D = temperature setting display
E = dimmer for LED-displays
(only accessible when door opens)
A
B
C
D
E
Note: The refrigerator is equipped to operate
on mains power, DC or liquid gas (propane/
butane). The desired power option is selected
by means of energy selector switch (A). Energy
selector switch (A) has four settings: AC mains
power, DC (12V), Gas (liquid gas), OFF.
Gas
AC mains power
12V DC
Automatic energy
selection
off
Appliances with automatic energy selection
have the additional setting ‘AUTo’.
MAnUAL EnERGY SELECTIon
Electrical operation 12V - operation (DC)
Warning: The refrigerator should only
be used while the motor is running,
otherwise the on-board-battery would be
discharged within a few hours!
A
C
1. Set energy selector switch (A) to 12V .
2. Operating display ‘C’, 12V lights ‘green’.
Appliance is in function.
B
3. Use rotary switch (B) to regulate the
temperature in the main refrigerator
compartment.
Note: If the operating display fails to light up (
it lights up ‘red’ at AES models ) the device is
not in operation. (See troubleshooting section).
Mains power
This option should only be selected where the
supply voltage of the connection for power
supply corresponds to the value specified on
the data plate. Any difference in values may
result in damage to the appliance.
A
C
-
extinguish naked flames.
• Never open the cooling unit; it is under
high pressure.
• Work on the gas, flue system and electrical
components must only be carried out by
qualified service personnel.
• It is imperative that the operating pressure
should correspond to the data given on
the model plate of the appliance.
• Compare the operating pressure data
given on the model plate with the data on
the pressure monitor of the liquid
gas cylinder.
• Gas operation of the appliance is not
permitted while travelling on ferries.
• Covers ensure electrical safety and must
only be removed using a tool.
• The appliance must not be exposed
to rain.
• The refrigerator is not suitable for the
proper storage of medications.
CooLAnT
Ammonia is used as a coolant.
This is a natural compound also used in
household cleaning agents (1 litre of Salmiak
cleaner contains up to 200g of ammonia
- about twice as much as is used in the
refrigerator). Sodium chromate is used for
corrosion protection (1.8% of the solvent).
In the event of leakage (easily identifiable from
the unpleasant odour):
• switch off the appliance.
• air the room thoroughly.
• inform the authorised Customer
Service department.
WARRAnTY AnD CUSToMER SERVICE
Warranty arrangements are in accordance
with EC Directive 44/1999/CE and the normal
conditions applicable for the country concerned.
For warranty or other servicing, please contact
our Dometic Service department. Any damage
due to improper use is not covered by the
warranty. The warranty does not cover any
modifications to the appliance or the use of
non-original Dometic parts.
The warranty does not apply if the installation
and operating instructions are not adhered
to and no liability shall be entertained. Parts
can be ordered throughout Europe from our
Dometic Service department.
Your Service Centre contact numbers are found
in the ‘European Service Network’ booklet.
When contacting Dometic Service, please state
the model, product number and serial number
together with the MLC Code, if applicable.
You will find this information on the data plate
inside the refrigerator.
DESCRIPTIon of MoDEL
Refrigerator Mobile /
Mobile Absorption Refrigerator
‘L’ with interior light
RM 7401 L
Last digit 1 = manual energy selection
Last digit 5 = automatic and manual
energy selection
CLEAnInG
Before using the refrigerator, it is advisable to
clean the appliance both inside and out.
• Use a soft cloth and lukewarm water with
a mild detergent.
• Then rinse the appliance with clean water
and dry thoroughly.
• Remove dust from the refrigerator unit at
yearly intervals using a brush or soft cloth.
Warning: To avoid deterioration of
materials:
• Do not use soap or hard, abrasive or soda-
based cleaning agents.
• Do not allow the door seal to come
into contact with oil or grease.
Using the refrigerator
• The cooling unit is silent in operation.
