electrical systems
72
electrical systems
73
LoGo SCREEn
AUTOCRUISE
The LOGO SCREEN will be visible when the
Unit is first connected to a 12v DC supply, or
while the vehicle is moving. While this screen
is displayed none of the Internal circuits will
be powered. To move onto the CLOCK SCREEN
(page 4) and turn on the 12v Systems in the
Motorhome then the centre Square Button
must be pressed.
To put the Display into Hibernation Mode then
the Centre Button must be pressed and held
the Display will go blank this will reduce the
drain on the Battery to a minimum, this will be
useful if the Motorhome is to be stored for a
long period of time. To turn the Display back
on then the Centre Button must be pressed.
The Display will only turn off when the Vehicle
is moving and not when the Engine is started,
this will allow you to start the Engine and Split
Charge the Habitation Battery whilst having
all the 12v systems of the Motorhome still
Working. As soon as the Vehicle starts moving
then the 12v Systems will be turned off.
The Fridge Circuit will Start working and the
Electric Step if fitted will retract as soon as the
engine is started.
CLoCK SCREEn
Thursday 21/06/07
14 : 30
The CLOCK SCREEN Displays the Time, Day and
Date this will only have to be adjusted for BST
and GMT otherwise the Display has a Lithium
Backup Battery that has a life Expectancy of 4
years approx (the life of the battery will depend
on many factors so the above figure is based on
an average use). If the Display loses its memory
then the battery will need replacing with a CR
1620 Lithium Battery this will mean removing
the Display to get to the PCB at the rear it
is recommended that this is carried out by a
qualified person. To set the Clock see Page 7. To
turn the Panel and the 12v Systems Off then the
Centre Button must be pressed this will take you
back to the LOGO SCREEN (the Display will do
this automatically when the Vehicle is moving).
By pressing the Right Arrow Button from this
Screen the following Screens will be displayed
after each press of the Right Button:
Pump Switch Screen
Charge Switch Screen
Clock Set Screen
Alarm Clock Set
Sound Level Screen
Water Alarm Screen after this Screen pressing
the Right Arrow Button again will take you
back to the Clock Screen.
By pressing the Left Arrow Button from the
Clock Screen the following Screens will be
displayed after each press of the Left Button:
Habitation Battery Screen
Vehicle Battery Screen
Battery Load Screen
Internal Temperature
Fresh Water Level Screen after this Screen
pressing the Left Arrow Button again will take
you back to the Clock Screen.
PUMP SWITCH SCREEn
PUMP - ON
lcd screen display user guide
The Water Pump can be switched On or Off
from the PUMP SWITCH SCREEN the Display
will change colour depending on whether the
Pump Is turned On or Off.
RED SCREEN for OFF.
GREEN SCREEN for ON.
To Switch the Pump On or Off then the Centre
Button must be pressed (when the pump
is running then a letter P will appear in the
bottom right hand corner of the Clock Screen).
The Display will automatically return to the
Clock Screen after approximately 2 minutes if it
is left on this Screen.
CHARGE SWITCH SCREEn
CHARGE
HABITATION
The CHARGE SWITCH SCREEN displays which
battery is being charged from the 240v Mains
Charger fitted to the Motorhome, this can
be switched between Habitation and Vehicle
by pressing the Centre Button the Screen will
Change Colour depending on which battery
is selected.
Green Screen Habitation Battery
Red Screen Vehicle Battery
When the Engine is running the Display will
show SPLIT CHARGE and the Screen will be
Blue, while the Screen is in this mode then
the 240v Mains Charger is taken out of the
System as the Vehicle Charging System is Split
Charging the Habitation Battery. The Display
will automatically return to the Clock Screen
after approximately 2 minutes if it is left on
this Screen.
CLoCK SET SCREEn
The CLOCK SET SCREEN allows you set the
Day, Date and Time.
CLOCK SET
To set the Clock press the Square Button and
follow the procedure listed below:
DAY
to set the correct Day press either the Left
or Right Arrow Buttons when the correct Day
is Displayed press the Centre Button to Accept
and the display will now show Date.
DATE
to set the correct Date press either the
Left or Right Arrow Buttons when the correct
Date is displayed press the Centre Button to
Accept and the display will now show Month.
MonTH
to set the correct Month press either
the Left or Right Arrow Buttons when the
correct Month is displayed press the Centre
Button to Accept and the display will now
show Year.
YEAR
to set the correct Year press either the
Left or Right Arrow Buttons when the correct
Year is displayed press the Centre Button to
Accept and the display will now show Hour.
HoUR
to set the correct Hour press either the
Left or Right Arrow Buttons when the correct
Hour is displayed press the Centre Button to
Accept and the display will now show Minute.
MInUTE t
o set the correct Minute press either
the Left or Right Arrow Buttons when the
correct Minute is Displayed press the Centre
Button to Accept and the display will move
onto Alarm Clock Set.
The Display will automatically return to the
Clock Screen after approximately 2 minutes if it
is left on this Screen.
ALARM CLoCK SET SCREEn
The ALARM CLOCK SET SCREEN allows you set
the Alarm Clock Time
To set the Alarm Clock press the Square Button
and follow the procedure as follows: