AUTHOR Alarm IGLA, Operating Manual

Page: 16 / 52

16
SYSTEM SETTING
Engine locking
The anti-theft system IGLA prevents the car theft by
stall of the running engine the engine start inhibit.
The method of locking is set
automatically when the
device is connected to the car:
• for some car models only the engine start inhibit
is available
• for some car models it is only possible to stall the
running engine
• for others both methods are available. In order
to deactivate the engine start inhibit see the item
«Options of the anti-theft system IGLA », page 41 .
An additional locking circuit is activated at the attempt
of driving without authorization (or in Anti-Hi-Jack
mode) when there is no data in the CAN-bus that
needed for the IGLA system or the digital locking has
failed. In other cases the activation of the additional
circuit is impossible.
To deactivate the engine locking enter the current
PIN-code or switch OFF the ignition for more than 10
seconds.
PIN-code setting
1. Make sure the ignition is switched ON, the RED and
the GREY wires are connected to permanent power
supply «+12V», the device is in PIN-code setting
mode (the indication signal flashes every 3 seconds).