AUTHOR Alarm IGLA, Operating Manual

Page: 39 / 52

39
indicated under protective layer on plastic card
included in the set.
7. Switch OFF the ignition and wait for 10 sec.
8. Switch OFF and ON again the Bluetooth in your
smartphone.
9. Check that Bluetooth connection with IGLA is
established and saved in smartphone settings.
Switch ON the ignition. Two indication flashes will be
provided on the dashboard if smartphone pairing was
successful.
You can start the engine and drive. IGLA will not be
locking the engine. Now your smartphone is paired in
Mode №2 and will be functioning as a key fob.
Smartphone will be functioning as a key fob only
when Bluetooth is switched ON.
The Smartphone as key fob is activated at distance
from 0,5 to 10 meters from the car depending on the
installation place of IGLA system.
Deactivation of Mode №2 in IGLA system:
1. Switch ON the ignition without starting the engine.
2. Enter the current PIN-code to authorize. There will
be 2 indication signals.
3. Press the accelerator pedal* as far as it can go and
keep it pressed.
4. Press the service button 29 times. The indication
signal will flash back 29 times to confirm the Mode
№2 action.
5. Release the accelerator pedal.
6. Switch OFF the ignition.
!
* For some car model other controls are used instead of an accelerator pedal.