AUTHOR Alarm IGLA, Operating Manual, Page: 9 / 52

9
• The car owner has key fob or smartphone with him;
• PIN-code is entered via standard buttons in the car.
By default, Step-by-step and Two-factor authorization
modes are disabled in the system. To enable one of
these modes, activate the corresponding menu item:
1. Switch ON the ignition without starting the engine
and enter the PIN-code to authorize.
2. Press the accelerator pedal* as far as it can go and
keep it pressed.
3. Press the service button:
• 23-times to switch ON Step-by-step authorization.
• 24-times to switch ON Two-factor authorization.
The indication signals (23 or 24 signals) will confirm
that the corresponding mode is activated.
4. Release the accelerator pedal*.
The system will disable step-by-step or two-factor
authorization if:
• If you choose another authorization mode;
• If you erase key fobs/smartphones from the system
memory;
• If you reset the PIN-code.
To provide the maximum level of security you can use
two-factor authorization mode
in IGLA system. In this
mode, the engine can be started only if two conditions
are observed: