38
Activate pairing Mode №2 in IGLA system:
1.
Switch ON the ignition without starting the engine.
2.
Enter the current PIN-code to authorize. There will
be 2 indication signals.
3.
Press the accelerator pedal* as far as it can go and
keep it pressed.
4.
Press the service button 28 times. The indication
signal will flash back 28 times to confirm the Mode
№2 action.
5. Release the accelerator pedal.
6. Switch OFF the ignition.
Smartphone pairing in Mode №2:
1.
Switch ON the ignition without starting the engine.
2.
Authorize in the system via PIN-code.
3.
Activate the PIN-code change mode (press the
accelerator pedal* as far as it can go, enter the
current PIN-code and release the accelerator pedal).
The indication signal will start flashing once in 3
seconds.
4.
Press the service button 1 time.
5.
Open your smartphone’s Bluetooth menu and search
for new devices.
During connection procedure the smartphone
interaction radius is limited. For successful pairing
it is recommended to put your smartphone as close
to IGLA system as possible (1 meter or closer).
6. Choose IGLA in the list of available devices. When
pairing you may need the Bluetooth pairing code
* For some car model other controls are used instead of an accelerator pedal
(see the annex).
!
Summary of Contents for IGLA
Page 1: ...OPERATING MANUAL ...
Page 25: ...25 Author Config ...
Page 51: ......
Page 52: ...Supported Cars List App ...
