manualshive.com logo in svg

AUTHOR Alarm IGLA, Operating Manual, Page: 47 / 52

Share
Download
AUTHOR Alarm IGLA Operating Manual Download Page 47

47

Joint work with TOR relay

TOR – digital CAN-bus relay aimed to provide complex 

protection of your car with the IGLA system installed.
TOR uses the additional locking circuit that is activated 

in  case  the  connection  with  the  engine  control  unit 

via  CAN-bus  is  faulty  or  disrupted.  Locking  allows 

to  activate  the  Running  engine  stall  option  for  cars 

without digital locking of the running engine.
To  do  this,  the  TOR  relay  must  be  coordinated  with 

IGLA system (see installation instructions).

Joint work with CONTOUR module

CONTOUR  is  a  control  module  for  the  hood  locks 

secures the under hood space when working together 

with  the  IGLA  system.      Apart  from  the  hood  locks 

control there is an option for the control of additional 

installed normally closed locking relay.
The hood locks are closed in the following cases:
•  The  car  security  is  activated  (the  central  lock  is 

closed)

• 

In 10 seconds after the ignition is OFF

•  The Anti Hi-jack mode is activated

The hood locks cannot be closed if the hood is open.   

The hood locks are unlocked after the authorization in 

the IGLA system.

For joint work CONTOUR must be coordinated with the 

IGLA system (see installation instructions).

Summary of Contents for IGLA





















































Reviews:

No comments