AUTHOR Alarm IGLA, Operating Manual

Page: 34 / 52

34
Manual connection
This method of connection is suitable for key fobs
that was once connected and then disconnected from
any immobilizer by AUTHOR-Alarm.
Use only key fobs with indication M52L on electronic
board. Do not use older version key fobs with
indication M24 on electronic board.
1. Take out the batteries from all key fobs including
those connected to the system and switch OFF
Bluetooth on all smartphones.
2. Switch ON key fob connection mode as indicated in
item 3 on page 33.
3. Close the key fob contacts (with a
piece of aluminum foil or a piece
of metal) as shown on the drawing
and insert the battery element. The
LED on key fob will start flashing
continuously with green light. After
the successful connection the LED
will blink once with red light.
If the connection did not happen, the green blinking
stops in 30 seconds after inserting the battery.
Be sure to check the key fob operation after connection
it to the device.
!
!