AUTHOR Alarm IGLA, Operating Manual, Page: 8 / 52

8
It is recommended to enter the PIN-code right before
the ride. The interval between the pressing of the
buttons shall not exceed 2 seconds. There is no
difference between long and short press of the button.
After you enter the correct PIN-code there will be 2
indication signals* and you can start driving.
If the PIN-code is not correct, there will be no
confirmation signals and if one attempts to start
driving or start the engine, the engine will be locked
(see page 16). The second attempt to enter the PIN-
code is available in 5 seconds after the failed attempt
to log in or after switching OFF the ignition for 10
seconds and starting the ignition again.
Step-by-step authorization and two-factor authorization
In step-by-step authorization mode to start driving the
car you need to go through two authorization stages:
1. You must have with you the key fob or smartphone
used as a key fob when you switch ON the ignition.
Starting the engine will be allowed (even if the
system is switched to engine start inhibit), however
IGLA will shut off the engine when you try to drive
while no PIN-code was entered.
2. To complete the authorization, you must enter PIN-
code via standard buttons in the car.
* The indication signals depend on a car brand/model.