7
RWA Control Unit
LSF 7000
01
s
afety
i
nstruCtions
Spare parts
System components can only be replaced with parts from
the same manufacturer. When third-party products are used,
the manufacturer’s liability, warranty and service are void.
Only original spare parts from the manufacturer are to be
used for extensions.
Environmental Conditions
The product must not be subjected to impacts or falls, nor
to vibrations, moisture, aggressive vapours or other harmful
environments, unless they are approved for one or more of
these environmental conditions by the manufacturer.
•
Operation:
Ambient Temperature: -5 °C … +40°C
Relative Humiditiy: < 90% to 20°C;
<
50%
bis
40°C;
No
formation
of
condensation
•
Transport / Storage:
Storage Temperature: 0°C … +30°C
Relative Humidity: < 60%
Accident prevention regulations and trade associ-
ation guidelines
When working on or in a building or part of a building, the
specifications and instructions of the respective accident
prevention regulations (UVV) and guidelines of the emplo-
yers‘ liability insurance association (BGR / ASR) must be ob-
served and adhered to.
Declaration of conformity
The Control Unit and system components are manufactu-
red and tested for their respective intended use according
to European guidelines. The corresponding declarations of
conformity and performance of the individual components
are available for the whole
L
iFt
-S
moke
-F
ree
system, as
well as the „general building approval“ (abZ) issued by the
DIBt. If the use or operation of the system components de-
viates from their intended use or the scope of the respective
approval, the approval loses its validity.
g
uidelines
And
s
tAndArds
During the assembly and the electrical connection
it is absolutely necessary to adhere to the latest country-
specific laws, ordinances, regulations and standards.
The relevant national laws, regulations and safety provisions
apply to the placing on the market, installation and commissi-
oning outside of Germany. .
The installer is responsible for the proper assembly or com-
missioning as well as for the preparation of the declaration of
conformity and marketing of the products in accordance with
EU directives.
For example, these are:
State building regulations
with special construction regulations
MLAR
- Model Pipeline System Guideline
Regulations of the fire protection authorities
TAB
(technical connection conditions)
of Energy supply
companies
Trade association regulations
, such as:
- ASR A1.6 and 1.7 (replacement for BGR 232)
Further standards and guidelines
, such as:
EN 81-1 / -2 / -20 / -73
Safety rules for lifts
VDI 6017
Lift controls in case of fire
EN 60335-2-103
Safety of electrical devices
EN 12101-10 / prEN 12101-9
Smoke and heat exhaust
VDE 0833-2
Hazard detection systems
Fire alarm systems
EN 14675
Fire alarm systems
DIN 4102-12
Function maintenance of
Electrical cable systems
VDE 0100
Erection of power
instllations up to 1000 V
EN 50441 / VDE 0815
Installation cables and
Installation lines
EN 50565-1
Cables and wires
VDE 0298-3
Use of cables
Accident prevention regulations
, in particular:
DGUV Regulation 1
Principles of prevention
(previously VBG 1)
DGUV Regulation 3
Electrical installation and
(previously VBG 4)
equipment
DGUV Regulation 38
Accident prevention regula-
(previously BGV C22)
tions for construction work
DGUV Information 209-053
Activities on lifts
(previously BGI 779)
Summary of Contents for Lift-Smoke-Free LSF 7000
Page 54: ...54 RWA Control Unit LSF7000 Notes 08 ...
Page 56: ...9000032001_V0 6_KW50 2021 ...
