38
RWA Control Unit
LSF 7000
Programme handling
The user interface of the programme enables quick and intuitive work.
A HELP function provides the necessary information.
The
LSF 7000
Control Unit was tested by the VdS in
the standard setting (delivery status). Modifications to
the central configuration may only be carried out by a
recognised installer (only for VdS systems).
After each configuration of the Control Unit, check that
it is functioning correctly. We cannot accept any liability
for errors caused by incorrect system configuration and
warranty claims must be excluded.
System requirements
The software can be installed on a portable computer with the following
features:
i
nStaLLation
S
tep
5:
s
ystem
configurAtion
viA
softWAre
:
LSF 7000
USB
!
Installation
A free version of the system software (VIEW version) can be downloaded
from the homepage
www.aumueller-gmbh.de
It can be installed on a
computer (Notebook or Netbook). Please note the hardware and system
requirements (see below).
For installation, follow the instructions on screen.
The software offers many features to adapt the the
system to your needs. Please note that not all available
functions can be used without activating the software
for a fee (licence).
If you wish to activate the software, please apply for an activation code.
After this code has been entered, the paid functions can also be used.
The „Software Clause for the Provision of Standard Soft-
ware as Part of Deliveries“ of the ZVEI (Central Associ-
ation of the Electrical and Electronics Industry e.V.) is
considered to be legally binding upon installation.
Connect computer to Control Unit
• Switch on the computer and
• connect to the control panel via the USB port (see figure).
• Then start the computer with the software already installed.
To avoid data loss, the USB cable should not exceed 5
metres in length. The use of a USB hub is not recommen-
ded. In contrast to the usual USB ports, the port is not
displayed in the Windows main bar.
CPU:
1 GHz or faster.
Betriebssysteme:
Microsoft® Windows 7
Microsoft® Windows 10
Memory:
512 MB RAM or more
Hard Drive:
At least 100 MB free memory space required.
Accessories:
USB po rt for computer connection<>Control Unit,
internet connection for system installation and updates.
Our software requires NET 2.0 Runtime™ and the Visual
C 2008™ Redistribution Package for the function. These
packages will be installed automatically by the installer
if they are not available on the system.
USB
USB
Computer
with software
„
LSF 7000
“
Connection Cable:
USB-A Plug
to mini USB-B plug
USB
i
nStaLLation
S
tep
5:
s
ystem
C
onfiguration
via
s
oftware
:
LSF 7000
05
Summary of Contents for Lift-Smoke-Free LSF 7000
Page 54: ...54 RWA Control Unit LSF7000 Notes 08 ...
Page 56: ...9000032001_V0 6_KW50 2021 ...
