Aumuller Lift-Smoke-Free LSF 7000, Instructions For Installation, Operation And Maintenance

Page: 41 / 56

41
RWA Control Unit LSF 7000
d
isplAy And
c
ontrol elements
Position in the Control Unit Meaning of the displays (overview)
The position of the displays and operating (buttons) is
identical for all versions of the
LSF 7000 Control Unit.
Only the number of ventilation lines is different.
The versions
LSF 7000
5A-0102,
LSF 7000
10A-0102,
LSF 7000
20A-0102 have two displays and
operating elements for the drive control (LT 1 and LT 2).
In principle, the green display „ B “, indicates that
the Control Unit is working properly. If a yellow display
„
S “, lights up, this indicates a fault which must be
eliminated immediately.
As the type of fault display in the break-glass units (HSE)
may differ from the fault display „
S “ in the Control Unit,
the displays in the Control Unit must always be observed
for precise fault determination.
D
isPlay anD
C
ontrol
e
lements
Explanations
GN = green
YE = yellow
RD = red
Only available for Control Unit versions:
LSF 7000 5A-0102
LSF 7000 10A-0102
LSF 7000
20A-0102
A
S
B
Push button:
Drive direction A = OPEN / Z = CLOSE
(2 x with version 0102)
Reset / EMERGENCY CLOSE (Resetting the
smoke detectors after EMERGENCY OPEN)
1 32 33 35 36 37
1 1 1
2
2
5
7
1
1 13 14 15 16 17 18 19
A
S
B
A
Z
A
Z
1 32 33 35 36 37
A
Z
A
Z
1 1 2 2 3 3
1 72
US
B
1.REL65 2.REL65
USB
BUS module
BUS wind rain RM HSE
LT 2
F1
A+
A-
N+
N-
Drive 1
Plug for fr
ont button
Drive 2
A
Z
Reset
LT 1
Displays:
(GN) = Operation
(YE) = Fault
(RD) = Alarm (EMERGENCY OPEN)
Drive direction and position
A
= OPEN (RD) /
Z
= CLOSE (GN)
Drive direction
A = OPEN (RD) / Z = CLOSE (GN) (Duo-LED)
(2 x with version 0102). The Duo-LED shows
the current direction of the line tension for
the duration of the set drive time.
A
Z
A
S
B
Drive direction
Drives Drives
*) The Duo-LED only lights up for the duration of the set drive time.
OPEN CLOSE
off
on (RD)
RD *) GN *)
A
Z
A
Z
A
Z
1 2 3
on (GN)
off
A
Z
1 2 3
Störung
Alarm activation / EMERGENCY OPEN
Network operation Battery Operation (power failure)
EMERGENCY OPEN EMERGENCY OPEN
flashing (YE) off (YE)
on (RD)
off
A
S
B
A
S
B
on (RD)
on (GN)
Faults
Display Meaning Note
Mains failure /
Battery operation
Battery fault
Fault of the
break-glass unit (HSE)
Smoke detector fault
Maintenance required Requires license
software
Fault
Drive linie 1
Fault
Drive linie 2 Only with version
Control Unit 0102
Fault EMERGENCY-
CLOSE button Permanent contact
The system was closed via the manual control
device. Smoke detectors are still activated.
A
S
B
A
S
B
flashes 5x
off
flashing slow
on
A
S
B
flashes 4x
off
A
S
B
flashes 2x
off
A
S
B
flashing slow
off
A
S
B
on
off
A
S
B
flashing fast
off
A
S
B
flashing
off
A
S
B
flashes 6x
off
06