10
Assembly Instruction
KSA - T
WIN
S12 24V DC
I
NSTALLATION
STEP
2:
P
REREQUISITES
FOR
A
SSEMBLY
/ P
REPARING
ASSEMBLY
I
NSTALLATION
STEP
2:
P
REREQUISITES
FOR
A
SSEMBLY
/ P
REPARING
ASSEMBLY
04
Tools required
• Marker
• Grains
• Hammer
• Knife
• Screwdriver (cross, Torx)
• Hexagonal wrench
• Torque wrench
• Power drill
• Threadlock adhesive
• possibly a tool for blind rivet nuts
Scope of delivery:
Prior to assembly, check that delivered products are com-
plete.
Preparing assembly
Check window size on site.
• Measure FAB and FAH.
• possibly establish the weight of casement or consult our
specialized staff.
Accessories for chain drive
Assembly and Commissioning
Instructions
Countersunk screws M8 (4x)
Brass washers (4x)
Blind plug (2x)
Cover caps (4x)
Chain unlocking key (2x)
Warning sign sticker
„Risk of entrapment“ (1x)
(german and english)
nach Maschinenrichtlinie 2006 / 42 / EG (Anhang VI)
KSA D S12 24V DC KETTENANTRIEB
Anweisung für
Montage und Inbetriebnahme
!
W
ARNING
Important instructions for safe as-
sembly:
Fully observe all instructions,
incorrect assembly may lead to serious
injuries.
Prerequisites for Assembly
When installing a “Partly completed machine - drive”, the
following requirements must be met in order to allow cor-
rect assembly with other components to produce a com-
plete machine without compromising health and safety of
people:
1. Choose suitable drive type.
2. Select suitable fastening material (casement bracket,
frame brackets) and adhere to the profi le-specifi c
hole layout.
3. There must be adequate space on the frame and on the
casement to accommodate a drive.
4. Before installing check that the window is in a faultless
mechanical condition.
It should open and close easily.
5. The fasteners to be selected for fastening the drive to
the window must be compatible with the window
material (see table).
W
ood windows
wood screws:
i.e. DIN 96, DIN 7996, DIN 571
with head-type:
round head with slot,
round head with cross,
hex head,special type
steel,
stainless steel,
aluminum windows
self-tapping screws, thread screws,
sheet-metal screws
i.e. ISO 4762, ISO 4017, ISO 7049 , ISO 7085, DIN 7500
with head-type:
cylinder head with hex socket, internal serration (Torx),
Phillips head or external hex head
blind rivet nut
plastic windows
screws for plastic
i.e. DIN 95606, DIN 95607, ISO 7049,
ISO 7085, DIN 7500
with head-type:
round head with cross, external hex head,
Torx
Recommendation
:
if possible
, screw
through two cavity
webs
1
2
3
4
5
6
