23
Assembly Instruction
KSA - T
WIN
S12 24V DC
Determined
profi le length
Version 1
Version 2
Version 3
!
I
NSTALLATION
STEP
10:
C
ONCEALING
THE
DRIVE
06
¢
Select the drive facing variant required.
¢
Determine the profi le length. (Please refer to the above
tables in this chapter: „C
ONCEALING
THE
DRIVE
“ or the pro-
ject-specifi c planning documents for length dimensions).
¢
Mark the required length.
¢
Push the mounting aid (piece of drive housing profi le)
into the cover profi le.
¢
Use a saw to shorten the cover profi le to the required
length.
¢
Deburr saw cut edge.
¢
Check the swivel area of the drive and if necessary cut
out the cover profi le in the area of the brackets.
¢
If necessary, paint the cover profi le with the required
colour.
¢
Push on the cover profi le so that it fi ts tightly. If
necessary, remove the cover caps
x
from the chain
unlocking holes.
¢
Push both end caps onto the spacers so that they are
fl ush.
¢
Glue adhesive dots on both sides in the cover profi le.
¢
Remove the protective fi lm.
¢
Push the spacers together with the end caps into the
profi le from the front.
¢
Align so that they are fl ush.
¢
Press on all parts fi rmly in the area of the adhesive dots.
¢
If necessary, feed the cable through the hole in the end
cap or close off the hole with blind plugs
w
.
Ensure that you saw the profi le perpendicular.
!
approx.
5 mm
approx
.
10 mm
32
variable
Installing the cover pr
ofi le
3
4
stickers
AP
AP
AP
AP
AP
AP
AP
AP
AP
AP
90°
AP
AP
