AudioCodes 405HD, Administrator'S Manual

Page: 85 / 242

Administrator's Manual 5. Configuring VoIP Settings
Version 3.4.3 85 400HD Series IP Phones
5.4 Configuring Ring Tones
Network administrators can configure and upload ring tones to the phone.
5.4.1 Configuring Distinctive Ring Tones
Network administrators can configure a phone to ring in a distinct tone per caller, thus
facilitating caller recognition and saving others from unnecessary disruptions to their
activities if the phone is shared.
 To configure a distinctive ring:
• Use the table as a reference.
Table 5-19: Distinctive Ringing Parameters
Parameter Description
voip/distinctive_ringing/0-4/ringtone A name to assign to a distinctive ring tone. The default ring
tone names are Ring01 – Ring11. (Optionally, select and
manually upload a customized tone – see Section 5.4.3). If
you don’t enter a name, the phone assigns the tone's
filename (without the .wav file extension) as the tone name.
voip/distinctive_ringing/0-4/type The 'Alert-Info' header's content in the INVITE message. It
should be configured in the SIP proxy or application server.
Used to distinguish between different calls.
5.4.1.1
Example of Configuring a Distinctive Ring
A ring tone whose name is Ring05 is configured to ring when the Alert-Info Header received
in the INVITE message contains external_call1 .

Example:

Configure parameter 'voip/distinctive_ringing/4/ringtone' to Ring05

Configure parameter 'voip/distinctive_ringing/4/type' to externall_call1
The Alert-Info header must contain external_call1 , as shown below. This is the INVITE the
phone receives from the proxy / application server.
Figure 5-2: Example of the Alert-Info Header
The phone will play ring tone 5 irrespective of the selected line ring tone.