AudioCodes 405HD, Administrator'S Manual

Page: 50 / 242

400HD Series IP Phones
Administrator's Manual 50 Document #: LTRT-11973
Parameter Description
system/daylight_saving/end_date/week Relevant to 'Day of week' mode:
The week of month (values 1-5) for end of
daylight saving time.
system/daylight_saving/end_date/day_of_week Relevant to 'Day of week' mode:
The day of week for daylight saving time
start
Valid values :
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
4.1.2 Configuring the NTP Server
The Network Time Protocol (NTP) server can be configured. When activated, date and time
are automatically obtained from the NTP server.
 To configure the NTP server:
•
Use the table as reference.
Table 4-3: NTP Server Parameters
Parameter Description
system/ntp/enabled Enables the NTP server from which the phone
automatically retrieves the date and time.

0 Disable

1 Enable – obtains the time information
automatically from a configured NTP server (default)
system/ntp/primary_server_address Defines the address of the main NTP server (this can
be a domain name, for example, tick.nap.com.ar).
system/ntp/secondary_server_address Defines the address of the secondary NTP server.
system/ntp/sync_time This sub-section defines how often the phone must
perform an update with the NTP server.

days -defines the number of days

hours - defines the number of hours
For example: To configure the phone to perform an
update with an NTP server every 1 day and 6 hours, set
the following:
system/ntp/sync_time/days=1
system/ntp/sync_time/hours=6
system/ntp/sync_time/days The number of days.
The valid range is 0 to 7. The default of days is 0.