400HD Series IP Phones
Administrator's Manual
208
Document #: LTRT-11973
To configure Genband configuration file parameters:
•
Use the table as reference.
Table 10-25: Genband Configuration File Parameters
Parameter
Description
voip/media/allow_multiple_rtp
Configure to
1
in order to make calls with PSTN. If
it isn’t configured, only one-way voice will be
heard.
voip/services/SLA/type
Configure to to
GENBAND_SCA
.
voip/services/sla/barging/enable
Configure to
1
. Default: 0.
voip/sla/group/0/description
[440HD only] Configure to
Group1
.
voip/sla/group/0/enabled
[440HD only] Configure to
1
. Default: 0.
voip/sla/group/1/description
[440HD only] Configure to
Group2
.
voip/sla/group/1/enabled
[440HD only] Configure to
1
. Default:
0
.
A.4.2 Configuring Call Pickup
When configuring a call pickup group, basic configuration options determine:
the numbers that route into a call pickup group
whether or not vertical service code (VSC) dialing can be used by group members
group members
Advanced configuration options allow you to specify:
the maximum number of group members
the maximum number of call queues
whether or not SIP dialog event package subscriptions are enabled
To configure a Call Pickup group:
1.
Open the Genband portal in your web browser and from the ‘Provision’ menu, select
Call Answer Groups
.
Figure A-14: Call Answer Groups
Summary of Contents for 405HD
Page 2: ......
