AudioCodes 405HD Page 180 Administrator'S Manual Download

Page: 180 / 242

400HD Series IP Phones

Administrator's Manual

180

Document #: LTRT-11973

10.4 Debugging using Packet Recording Parameters

Packet recording parameters allow you to debug voice activity on the phone.



To debug:

•

Use the table as reference.

Table 10-3: Recording Parameters

Parameter

Description

voip/packet_recording/remote_ip

The IP address (in dotted-decimal

notation) of the remote computer to

which the recorded packets are sent.

The recorded packets should be

captured by a network sniffer (such

as Wireshark).
The default value is 0.0.0.0.

voip/packet_recording/remote_port

Defines the UDP port of the remote

computer to which the recorded

packets are sent.
The valid range is 1024 to 65535.

The default value is 50000.

voip/packet_recording/enabled

Activates the packet recording

mechanism.



Disable (default)



Enable

voip/packet_recording/rtp_recording/enabled

Only displayed if the parameter

'Enable DSP Recording' is enabled.
Activates the DSP RTP recording.



Disable (default)



Enable

voip/packet_recording/ec_debug_recording/enabled

Activates the Echo Canceller Debug

recording.



Disable (default)



Enable

voip/packet_recording/noise_reduction_recording/enabled

Traffic on the network stops when the

MUTE key is activated.



Disable (default)



Enable

voip/packet_recording/network_recording/enabled

Activates the DSP network (TDM

Out) recording.



Disable (default)



Enable

voip/packet_recording/tdm_recording/enabled

Activates the DSP TDM (TDM In)

recording.



Disable (default)



Enable

voip/packet_recording/cng_debug_recording/enabled

Default=0

Summary of Contents for 405HD



















































































































































































































































Search results

Summary of Contents for 405HD

Reviews:

Related manuals for 405HD

Brands by name

Popular brands

AudioCodes 405HD, Administrator'S Manual

Search results

Summary of Contents for 405HD

Reviews:

Related manuals for 405HD

Brands by name

Popular brands