Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- -> Detach fluid hose -4- at spray jet -3-.
- Screw out bolts -1- and -2- and detach spray jet.
Installing
Install in reverse order, paying attention to the following:
Note:
Secure all hose connections with standard hose clamps.
=> Parts List
- Use pliers V.A.G 1275 to fit hose clamp.
- Install front bumper.
=> General Body Repairs, Exterior; Repair Group 63
Tightening torque
Component
Nm
Spray jet to bumper
2.5
4.3 - Adjusting spray jets
Note:
The spray jets supplied are pre-set at the factory and do not have to be adjusted following installation.
4.4 - Removing and installing washer fluid reservoir
Note:
The joint washer fluid reservoir for the windscreen and headlight washer systems is located at the front left of
the engine compartment. Removing and installing => Page
74
.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
88
92 - Windscreen wipe and wash system