manualshive.com logo in svg

Audi A3 1997, Service, Page: 70 / 205

Share
Download
Audi A3 1997 Service Download Page 70

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not 
 permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability 
     with respect to the correctness of information in this document. Copyright by AUDI AG.

2.4 - Multi-pin connectors at dash panel insert

Note:
All warning lamps in dash panel insert are fitted with light-emitting diodes. Dash panel insert must be replaced

in the event of warning lamp failure.
Midline dash panel insert

     A -     -> Green 32-pin connector

     B -     Blue 32-pin connector

     C -     Black, 4-pin connector for radio clock

Highline dash panel insert

     A -     -> Green 32-pin connector

     B -     Blue 32-pin connector

     C -     Grey 32-pin connector

     D -     Black, 4-pin connector for radio clock

2.5 - Assignment of contacts at multi-pin connectors at dash panel insert

Audi A3 1997 ➤

Electrical system - Edition 10.2003

62

 90 - Gauges, Instruments

Summary of Contents for A3 1997














































































































































































































Reviews:

No comments