Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
- -> Use mandrel T10060 or offset Allen key to lock ribbed belt tensioner.
- Detach ribbed belt.
- -> Unplug connector -2-.
- Unscrew wire -1- at alternator.
Note:
If fitted, unscrew clamp with alternator detached and lay bare wire.
- -> Screw out bolts -arrows-.
- Detach alternator and guide it upwards out of engine compartment.
Installing
Install in reverse order, paying attention to the following:
- To facilitate positioning of alternator, drive back bushings for retaining bolts slightly.
- Make sure ribbed belt is properly positioned and correctly routed.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
2.2 - 1.6 l and 1.8 l engine
21