Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Installing
Install in reverse order, paying attention to the following:
- Engage fog light on inside at bumper.
- Adjust fog light => Page
130
.
Tightening torque
Component
Nm
Fog light housing to bumper
5
3.6 - Replacing fog light bulbs (gas-discharge headlights)
Removing
- Remove fog light => Page
127
.
- -> Release cover -1- by turning anti-clockwise -arrow- and detach cover.
- -> Unplug connector -2-.
- Disengage spring clip -1- and take bulb out of housing.
Installing
Install in reverse order, paying attention to the following:
- Insert new bulb in housing, taking care not to touch glass bulb with bare hands.
- Heed bulb installation position
- Secure bulb with spring clip.
- Re-attach connector and close housing cover.
- Adjust fog light => Page
130
.
Audi A3 1997 ➤
Electrical system - Edition 10.2003
3.5 - Removing and installing fog lights (gas-discharge headlights)
129