CHAPTER 13: FIRMWARE UPDATE & RECOVERY
14-6
MDU Solutions
®
– DVIS/DVISm - Digital Video Insertion System & Mini Digital Video Insertion System - Installation & Operation Manual
14.7.5 Connect to GUI
1. Open an Internet Explorer browser window and enter
http://192.168.0.23/site
in the address field.
2. When the login screen appears, enter
atx
for both the Username and Password, see Figure 13-7.
3. Upon validation of the login and password, the ‘DVIS Recovery’ page appears, see Figure 13-8.
14.7.6 Upload Firmware
1. Click
Browse
, see Figure 13-
8, navigate to the location of the
saved files and select the file. The
file name and location appear in the
selection box.
2. Click
Update
to begin uploading
the file to the unit. A progress bar
indicates the percentage completion (0 to 100%). When the upload is finished, the Upload Done page appears in the
web browser as shown in Figure 13-9 and file installation on the DVIS begins automatically.
3. Close the web browser.
4. When installation has completed (which can
take several minutes), the unit reboots (indicated
when the fan shuts off for a few seconds and
then restarts). After a few seconds the second
fan restarts.
5. Wait an additional 90 seconds, reopen the web
browser and enter
http://192.168.0.23/site
in
the address field. When the login screen appears,
enter
atx
for both the Username and Password,
see
Figure 13-10. The ‘DVIS Encoder Settings’ page appears.
6. Click
Maintenance
and verify that ‘Version’ is the same as the name of the upgrade file, see Figure 13-11.
Figure 13-7: Login
Figure 13-8:
Restore System Firmware
Figure 13-9:
Upload Done
Figure 13-10: Login
Figure 13-11:
Check Firmware Version
