CHAPTER 9: MAINTENANCE TAB - CONFIGURATION
9-6
MDU Solutions
®
– DVIS/DVISm - Digital Video Insertion System & Mini Digital Video Insertion System - Installation & Operation Manual
9.6.10 Quick Guide to Export Settings
The screen capture construction in
Figure 9-9 may be used to clarify these instructions.
1. Click the
Maintenance
tab
2. Click
Export Settings
button.
3. A window opens allowing the selection of the dataset to be exported from this DVIS. After selection click
Export
.
4. A new window will open with a web-link to download the settings file.
5. Click this hyper-link.
6. Another new window opens with a prompt to act on the file, (it’s format depends on the browser used and it’s version)
asking to open or save this file.
7. Save this file in a known location on the PC. You may accept the offered file name or change it in any way you want to
personalize it to identify the DVIS it is saved from. Without renaming, every DVIS export file will be named identically.
8. This file can be used later to be uploaded into a DVIS through the DVIS update page, in same way as new firmware
would be loaded. The execution of such uploaded file happens in same way as when firmware files get uploaded, and
after that process is done the receiving DVIS will have same parameter settings as originating DVIS.
9.7 Network Settings
This section defines the setting for the Ethernet GUI port on the front panels. The
configuration of the Gigabit Ethernet card is detailed in
“IP Output Tab - Configuration”
NOTE: Any change to network parameters triggers a reboot when
applying the changes with the ‘Set Network’ button.
Figure 9-9:
Export Settings Procedure Illustrated
Figure 9-10:
Network Settings Section
