89
Parameter structure and indication of LCD on parameter edit
Offset from Edit start
point
LCD Display
Parameter Randomize
: Randomize TYPE change
: Return to Parameter EDIT(Parameter #1)
: Return to Parameter EDIT(Parameter Type Top)(*)
Encoder rotate: Randomize RATE change
Encoder push: Execute randomize process
with Encoder push: RATE * 10
(*) << INST EDIT >> In the case of INST EDIT, if Randomize Type is "MainPrm"
or "SubPrm" or "XtraPrm", editing returns back to each category’s top parameter
by pushing
.
(*) << EFFECT EDIT: M.Tap Delay >> In the case of EFFECT EDIT and algorithm
is Multi-Tap Delay, if Randomize Type is "TimePrm" or "Lev Prm" or "Pan Prm" or
"FB/HFD", edit returns back to each top parameter of related parameters by pushing
.
M e m o
This is a useful method for checking values after they have been randomized.
In others cases where a different Randomize Type (other than those shown above) is
selected, edit returns back to INST or EFFECT top parameter by pushing .
Output Peak Meter
: Return to Parameter EDIT (Parameter #1)