53
SYS : APP info
Here you can view information about the aFrame.
1.
Turn the encoder. Information is displayed.
Display indication
Explanation
VER.1.00-BLD.001
aFrame firmware version
2017/01/01 12:34
Date on which the aFrame firmware was updated
POT:0d 12:34:56
Power On Time (time since the power was turned on)
POC:14times
Power On Count (number of times that the power was turned on)
CHC:123456times
Center Hitting Count (number of times that the center was struck more strongly than
the prescribed level)
EHC:133333times
Edge Hitting Count (number of times that the edge was struck more strongly than the
prescribed level)
PST:0d 00:02:50
Pressure Sens Time (cumulative time that the pressure sensor was pressed more strongly
than the prescribed level)
*The values in the above table are examples. The values actually displayed will differ depending on the conditions
of use.
Items other than the firmware version are saved when the aFrame is correctly shut down.
2.
Press the [5 EFFECT] button to return to Play mode.
SYS:Get Time (Extension)
When this system edit function is executed, an aFrame with an RTC (Real Time Clock) circuit installed displays the time
that is set using the system edit function SYS: Set Time.
(Note) The RTC circuit is not installed in the standard version of the aFrame.
Example display with RTC circuit:
The standard version of the aFrame without an RTC circuit displays the time elapsed since the last firmware update.
When the aFrame is turned off, the time returns to the original time of the update.
Example display without RTC circuit:
System parameter
