50
System parameter
SYS: TnDest
The figures above refer to an example case when the tone source for SYS:Load LdP2B is Factory Init 1 (Factory Presets
1 / Version 1.20). To execute this load to buffer step of the process, press the encoder. A load progress graphic and
message will be briefly displayed to confirm that Factory Presets 1 has been loaded to the temporary buffer.
The next screen that displays is for the SYS:TnDest step of the process. The group/tone A’01 blinks indicating that it
is currently selected as copy destination. You can select ‘Harmo Drum’ as the source tone from Factory Preset 1 by
turning the encoder. When you push the encoder, the group/tone value stops blinking indicating that the source
tone has been copied to the destination tone.
If during this process you change the group/tone number for the tone destination, or if you change the tone source,
the group/tone number on the upper line of the LCD display starts blinking again. This enables to you to continue
the selection operations.
Pressing the [1 PITCH] button returns to the previous screen and the SYS: Load LdP2B step in the process. As
described above, you can change the source project by turning the encoder and load it into the temporary buffer
by pressing the encoder. Executing this moves forward to the SYS:TnDest step of the process again. This flexibility
enables you to quickly select and copy tones from different project sources (Internal Memory, Factory Presets, SD
card) into different group/tone number destinations in the working project. To return to play mode at any time,
press the [5 EFFECT] button.
