25
Instrument and effect parameters
Mode
Function
Description
Master Bus Switch On
Send to Master Mix Bus (On).
- The timbre layer’s effect level send is directly routed to an
insert effect on the Master Mix bus.
Master Bus Switch Off
Send to Master Mix Bus (Off).
Certain effects such as Wah, Space R and Space Z, do not work as well as Master Bus Insert effects. To compensate for this,
an alternative Send-Return effects bus has been implemented.
Using this switch function enables a send to the SEND BUS (SBUS), but cuts the send to the MASTER MIX (MBUS). This
function is to be used when a send-return effect is preferred for a particular timbre.
The Master Bus Switch On (M+) and Off (M-) is an option parameter than can be accessed when you select and adjust the
following effect send level parameters: MixMainSnd, MixSubSnd, MixXtraSnd, MixDryCSnd, MixDryESnd.
So for example, the setting below indicates that the Main layer’s effect send level is 100, and the Master Bus Switch is ‘On’
for this layer.
MixMainSnD:100M+
Using the and buttons either side of the LCD display, you can switch between the ‘On’ (M+) and ‘Off’ (M-) settings.
*The Wah effect was only available as a Master Bus Insert effect for firmware versions prior to 2.00.
The general effect parameter FxMtrx has two settings that determine whether the effect is enabled as a Send-Return
effect (Snd/Rtn) or Master Insert effect (Master Ins).
[INST] Addition of Mixer selection MASTER MIX BUS SW
With the release of firmware version. 2.00, we have added an On/Off Master Bus Switch (MBUS) to the mixer section
parameters to control effects processing.
MixMainSnd, MixSubSnd, MixXtraSnd, MixDryCSnd, MixDryESnd (MASTER MIX BUS Control)
