ATV aFrame, Reference Manual

Page: 55 / 93

55
System parameter
SYS : Test EEPROM (for servicing)
This operation tests the EEPROM.
1.
Push the encoder.
The test starts.
2.
Return to PLAY MODE by pushing the [5 EFFECT] button.
SYS:Test INTRAM (for service)
1.
Push the encoder.
The test starts.
2.
Return to PLAY MODE by pushing the [5 EFFECT] button.
SYS:Adj Cnt.Sens (Freq, Gain, Q)
This setting adjusts the sensitivity of the center sensor.
The frequency (Freq), gain (Gain) and Q value (Q) can each be adjusted.
1.
Turn the encoder to adjust the value.
2.
Press the [5 EFFECT] button to return to play mode.
SYS : Adj EdgeSens (Freq, Gain, Q)
This setting adjusts the sensitivity of the edge sensor.
The frequency (Freq), gain (Gain) and Q value (Q) can each be adjusted.
1.
Turn the encoder to adjust the value.
2.
Press the [5 EFFECT] button to return to play mode.
SYS:Set PressMax
This setting adjusts the maximum value of the pressure sensor.
1.
While watching the right-most value shown in the display, press the pressure sensor.
2.
While continuing to press the pressure sensor, press the encoder
3.
Press the [5 EFFECT] button to return to play mode.