ATA J2200-VoIP GATWAY User’s Manual
Single computer environment quick setup
Refer to the Connection Graph above; connect ATS-J2200X with your personal computers and
telephone:
Connect your modem and WAN port of ATS-J2200X with network cable.
Connect your computer and LAN port of ATS-J2200X with network cable
Connect your telephone cable to the phone port of ATS-J2200X.
Connect the power cord to ATS-J2200X power port.
Power LED will be ON. The start-up process will take approximately 20 seconds.
REG LED ON: You may start to use VoIP services and make any phone calls.
REG LED OFF: Internet status error. The ATS-J2200X is not successfully connected with
internet. Please follow the steps below to configure ATS-J2200X.
