ATA J2200-VoIP GATWAY User’s Manual
PPPoE User Network Environment:
The installation will auto detect your network environment after put on the CD-ROM with
connection of ATA. Just wait 5 minutes the ATA will detect the PPPoE network by itself and
setup your computer to DHCP mode automatically.
1. By detecting PPPoE settings with connection of the ATA, while the page lead you to dial
the PPPoE from your computer, you have to click the PPPoE dialer on your computer to
connect internet and make sure you do connect the internet successful.
2. The ATA PPPoE detection will auto set according to your PPPoE dialer through your
computer.
3. Just wait for 3~5 minutes the ATA will set itself well. If it failed, please redial PPPoE
function from the computer.
4. Then the ATA had been installed successfully and the computer had been set for DHCP
client to get new IP from the ATA LAN/PC port.
