ATA J2200-VoIP GATWAY User’s Manual
How to make a phone call
When your ATS-J2200X is configured properly, you can make a phone call to your friend in
the same Service provider.
If you want to make a phone call, you can dial the phone number and press “#” button to
start to dial the phone number.
The ATS-J2200X also provides some functions that list as below:
1. Call Waiting: When a new call is coming while you are talking, you can push the Flash
button to switch to the new call. You can push the Flash button to switch between the
two calls.
2. Call Hold: You can push the Hold key to hold the current call for a while, then push Hold
key again to keep talking.
3.
3-way conference: If you want to make a 3-way conference call, you can make a phone call to
the first phone number. After the call is established, push the Flash button then you can hear the
Dial tone, then make a phone call to the second phone number. When the second call is
established, press the Flash button again.
Get a FWD account
1. The website is http://www.freeworlddialup.com; you can apply an account to use the
VoIP communication. You can follow the instruction to input the information. After you
finished, you will receive a mail sent by the FWD mail system, you will get the account
information in the mail.
2. When you got the account, you can setup the related information into the ATS-J2200X.
3. You can setup the related information into the ATS-J2200X by web browser. Also you
can use Telnet, Console via CLI command to configure the ATS-J2200X. You need to
input the Proxy Name, Domain Name, Register Name, and password. The Display
Name you can input what you want to let others see.
4. After you registered to the SIP Server, you can try to call your friends who also
registered in the same SIP Server. You just need to dial your friend’s user name
(registered name) and press “#” then you can make a phone call to your friend.
If you want to make a phone call to the other in the internet, first you need to registered in a
Proxy Server (with SIP Server IP, Domain IP, registered name, Password), make sure you
already enable Stun function, then you can try.
