ATS J2200, User Manual

Page: 6 / 50

ATA J2200-VoIP GATWAY User’s Manual
Group IVR Action IVR Menu Parameter (s) Notes
Function Reboot #195# None After you hear “Option Successful,”
hang-up. The system will reboot
automatically.
Function Factory Reset #198# None System will automatically Reboot.
WARNING: ALL
“User-Changeable” NONDEFAULT
SETTINGS WILL BE LOST! This
will include network and service
provider data.
Info Check IP Address #120# None IVR will announce the current IP
address of the ATA-1000
Info Check IP Type #121# None IVR will announce if DHCP in
enabled or disabled.
Info Check Phone Number #122# None IVR will announce current in use
VoIP number
Info Check Network Mask #123# None IVR will announce the current
network mask of the ATA-1000.
Info Check Gateway IP
Address #124# None IVR will announce the current
gateway IP address of the
ATA-1000.
Info Check Primary DNS
Server Setting
#125# None IVR will announce the current
setting in the Primary DNS field.
Info Check Firmware Version #128# None IVR will announce the version of
the firmware running on the
ATA-1000.
Setting Set DHCP client #111# None The system will change to DHCP
Client type.
Setting Set Static IP Address #112xxx*xxx*xxx*xxx# Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point. DHCP will be disabled and system
will change to the Static IP type.
Setting Set Network Mask #113xxx*xxx*xxx*xxx# Enter value using numbers on the
telephone key pad. Use the * (star)
key when entering a decimal point. Must set Static IP first.
Setting Set Gateway IP Address #114xxx*xxx*xxx*xxx# Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point. Must set Static IP first.
Setting Set Primary DNS Server #115xxx*xxx*xxx*xxx# Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point. Must set Static IP first.
Setting Set Codec #130+[1-8]# 1:G.711 u-Law, 2: G.711 a-Law, 3:
G.723.1, 4: G.729a, 5: G.726 16K,
6: G.726 24K, 7: G.726 32K, 8:
G.726 40K, You can set the codec you want to
the first priority.
Setting Set Handset Gain #131+[00~15]# Handset Gain from 0~15 You can set the Handset gain to
proper value, default is 6.
Setting Set Handset Volume #132+[00~12]# Handset Volume from 0~12 You can set the Handset volume to
proper value, default is 10.