ATA J2200-VoIP GATWAY User’s Manual
By foregoing step you still couldn’t set the J2200X network settings, you have to setup
the J2200X network settings by login into J2200X web browser.
Setup the ATS-J2200X by Web Browser
The ATS-J2200X provides a built-in web server. You could use Web browser (Internet Explorer,
Mozilla Firefox etc.) to configure ATS-J2200X.
1. Launch your web browser and enter
http://192.168.251.1
(the default IP address of the
ATS-J2200X) in the Location or Address field. Press Enter.
2. The password screen now appears. Input
username:
user
and
password:
test
into the
blank field.
3. Click the [
Login
] button
4. After a successful login, you will see the ATS-J2200X web based management information
page.
Note
: If you make any change of settings in the Web Management interface, please do
remember to click the [Submit] button in that page. A message showed
you have to
save
and
reboot
the VoIP to take effect
notice you to click [Save change & Reboot] on
the navigation panel and click [Save] in the Save changes page. After the system reboot,
all the settings will work properly.
System Information
This is the web based management information page, you can see the ATS-J2200X
current system information like firmware version, company… etc in this page.
Click a link on the navigation panel to go to the corresponding function.
