ATA J2200-VoIP GATWAY User’s Manual
3.
WAN Settings:
You can configure the ATS J2200X WAN setting in this page.
The
LAN Mode
is to set the ATS J2200X Bridge mode or Router mode. If you set the
Bridge Mode, then the two Fast Ethernet ports will be transparent. Otherwise, if you
set the NAT Mode, then the LAN port would router access.
The WAN Setting Configuration item is to set the WAN port’s network environment.
You may refer to your current network environment to configure the ATS J2200X
properly.
The PPPoE Configuration item is to set the PPPoE Username and Password. If you
have the PPPoE account from your Service Provider, please input the Username and
the Password correctly.
When you finished the setting, please click the Submit button.
4.
LAN Settings:
You can configure the ATS J2200XLAN setting in this page.
The LAN Setting item that you could set the router mode address.
The
IP
was Router mode of LAN port’s Ethernet address. Ex:
192.168.123.1,
this means
LAN address would be
192.168.123.xxx
Ethernet class.
The
Mask
was Ethernet Mask that you could set it what you want to set.
The
MAC
was ATSJ2200X LAN port’s MAC number.
5.
DHCP SERVER
The DHCP SERVER is for the other devices to get the IP address from the device. You
can choose to use DHCP server or not.
