ATA J2200-VoIP GATWAY User’s Manual
until
put on
the
CD-ROM
. The installation will lead you set up the Ethernet by step
automatically.
Step1
: To make sure the connection between your computer with the ATA Box.
Step2
: Put the installed
CD-ROM
into the computer CD-ROM drive.
Step3
: The installation will be implemented automatically.
Step4
: Just wait about 3~5 minutes until the ATS-J2200X set up ready. It has to take so much
time while you set up the ATS-J2200X at first time, Please hold on a minute.
Step5
: After the ATA finished setting network condition, the ATA will reboot and download the
web configure file by itself automatically. You will see the
REG LED
ON
then you can
pick the phone up and enjoy your calling with the ATA. And the computer will be working
well by installing automatically.
ATA Network Setup Automatically Step By Step
While user put on the CD-ROM and auto run by drive, the information page will show on your
screen step by step.
