III. roduct and Equipment Safety
● This product is a high-voltage heavy current product. Incorrect connection may lead to damage to the
product.
● PE terminal must be connected to a ground wire and make sure that the ground wire is reliably
grounded.
● AC 220V power supply is suitable for this product. Do not connect an AC380V one to the servo
driver.
● The U, V and W of the product should be connected with the motor. They are outputs. Do not connect
them with input power supply.
● Do not connect the three-phase outputs U, V and W of the product in an incorrect sequence; because
incorrect connection may lead to motor racing, damage to equipment, and overcurrent damage to the
product.
●
Tighten all terminals. The materials of all matching wires should be strictly selected according
to power.
● Power distribution and touching of the terminals are not allowed when the driver is electrified.
● Do not touch the terminals within five (5) minutes after power down.
● It is not allowed to touch the motor and cables when the motor is in operation in order to avoid
accidental injuries such as scalding and wrench, etc.
II. ite Safety
● This product is a high-voltage heavy current product. It is not allowed to electrify and use the
product where there are combustible or corrosive gases; otherwise fire and explosion may be caused.
● It is not allowed to electrify and use the product where combustible or corrosive articles drop;
otherwise fire and explosion may be caused.
● It is not allowed to use the product in the places with high humidity, moisture and metal powder;
otherwise dangerous accidents such as electric shock, etc. may be caused.
I. Personnel Safety
●
This product is a high-voltage heavy current product. Make sure that personal are within the
safety area of moving mechanisms.
● Improper operation may cause accidents such as electric arc burn or electric shock, etc.
● It is not allowed to operate, wire and electrify the product without following this manual.
Important Safety Information
I
